Carpet stains are inevitable. At one point or another, you’ll have to deal with having to remove a stain from the carpet. Consistently stick to any instructions provided by the carpet manufacturer. Carpets made from natural fibers or specific dye types may require special treatment. If you aren’t sure check with a cleaning specialist for assistance. However, for many common stains if you abide by these upholstery stain removal ideas and you’ll have your stain lifted very quickly.
Regardless of how hard we might attempt to keep our rugs in the elite state, it seems an inevitable fact of life that we will all be faced with the problem of carpet stains.
Carpet stains are much more unsettling to people who have recently bought brand new carpeting. It’s quite frustrating to have new carpeting installed simply to find a glaring blot in only a month despite the best attempts to prevent that situation.
In the following article, I hope to supply you with the information you need to effectively handle common carpet cleaning issues.
First, a bit about me, after all, why should you listen?
The information I’m about to discuss is backed up by several years of carpet cleaning experience both commercially and residentially.
I had been a professional cleaner and cleaned rugs many times for various office buildings in northeast Pennsylvania. Having been exposed to commercial carpet cleaning it appeared natural for me to spend some time cleaning my own carpeting at home rather than hiring the job to be carried out.
As you may guess, this report is not based on a lot of theories. It is based on real-life “from the trenches” carpet cleaning experience. Visit this website for more information.
Beer, Wine, Cola, Coffee
Blot with a paper towel to remove as much of the stain as you can, then neutralize with a white vinegar solution made up of 1/4 cup white vinegar in 3/4 cup of water. Soak the spot with white vinegar solution then blot to remove the excess moisture. A spray bottle works well for implementing the solution. If you the blot has still not lifted mix 1 teaspoon of dish detergent for example Joy to 1 quart of water and then apply to the region. Blot to work the detergent into the stain, then blot again to lift the stain. Repeat until the stain is still gone. Then rinse with water and blot excess water up. Do not use dish soap that comprises bleach or lanolin since it will damage your carpet.
Berries or Fruit Juice
Remove as much of the spill as you can by scraping the excess up using a dull knife. If you’ve got a wet vacuum it works nicely for sucking up the excess. If the spot has dried you will need to saturate it with water so that you can lift the excess. First, consider removing with water by spraying the region and then blotting with a paper towel. If that doesn’t fully lift it then employ a small mix up 1/2 teaspoon dish soap in 1 quart of water and apply the mixture to the region. Continue pruning to lift the stain. Continue applying until the stain is completely lifted. Then rinse the area with water using a spray bottle, and then blot to remove excess water. If the soap blend did not raise the entire stain then moisten the area with 3% hydrogen peroxide and let stand for about 2 hours. Blot and repeat the hydrogen peroxide treatment until carpet the stain is gone. When exposed to light hydrogen peroxide contributes to a water state so that you don’t have to rinse just dab up the excess moisture.
Blood, Catsup, Vomit
Blot up as much of the stain as possible then neutralize with an ammonia solution made up of 1 tablespoon ammonia and 3/4 cup of water. With a spray bottle saturate the spot with the ammonia option but be sure not to find the carpet backing wet. Subsequently, blot with a white paper towel to remove excess moisture. All solutions for eliminating blood ought to be cold. First mix a solution of 1-quart water and 1/2 teaspoon dish soap. Then apply a small amount of detergent solution to the spot. Blot to work the detergent into the affected area. Continue using and blotting until the stain is completely removed. If the soap blend did not lift the entire stain then moisten the region with 3% hydrogen peroxide and then let stand for about 2 hours. Blot and repeat the hydrogen peroxide treatment until carpet the stain is still gone. When exposed to mild hydrogen peroxide contributes to a water condition so that you don’t have to rinse just dab the excess moisture.
Require a piece of brown paper or a terry cloth towel over the region then lightly run a warm iron on it. The wax will be absorbed into the towel or paper. You can remove any residue with alcohol or dry cleaning fluid.
Chewing Gum, Contact Cement, or Glue
First, choose an ice cube and use it into the gum. This may freeze the gum. Shatter the frozen gum with the handle of a knife then vacuum up.
Eliminate as much of the spill as possible by scratching the excess up with a dull knife and then blotting with a paper towel. Blot up as much of the stain as possible then neutralize with an ammonia solution made up of 1 tablespoon ammonia plus 3/4 cup of water. With a spray bottle saturate the area with the ammonia solution but make sure not to get the carpet backing moist. Then blot with a white paper towel to remove excess moisture. If the stain hasn’t lifted mix a way of 1-quart water and 1/2 teaspoon dish soap. Continue using and blotting until the stain is fully eliminated. If the stain is gone rinse with clear water and blot.
Crayon, Paint, or Makeup
Eliminate as much of this crayon by blotting with a paper towel. Use a dull knife to scrape up everything you can. Subsequently, use to rubbing alcohol to a white fabric or cotton ball and blot. You might have to use extra if the crayon goes deep to the pile but be certain that the backing doesn’t become wet. First mix a solution of 1-quart water and 1/2 teaspoon dish soap. Then apply a small amount of detergent solution to the spot. Blot to work the detergent into the affected area.
Continue applying and blotting until the stain is fully eliminated. If the soap blend did not raise the entire stain then moisten the area with 3% hydrogen peroxide and then let stand for on 2 hours. Blot and repeat the hydrogen peroxide treatment until carpet the stain is gone. When exposed to light hydrogen peroxide contributes to a water condition so that you don’t have to rinse just dab the extra moisture.
Remember always follow the manufacturer’s instructions for stain removal. Coupled with these carpet removal tips you should have no difficulty raising the toughest of stains.